What's New

What's New

June 2008

Upgraded JK 1/32 'C' can Saloon/Sports Chassis Kit - £32.85

JK-1083E Newly improved version of this great performing Gp 12 Saloon chassis

Nickel plated, easy to build and sturdy

Handled extremely well previously and now much improved with

a larger motor opening to allow fit of most 'C' can motors

and a wrap around 'T' bar configuration at the front

for stability, improved balance and performance

May 2008

The TITANS are back !

Mossetti's Super 1/24 2 piece Chassis

The tooling is now repaired

and the Titan 1/24 Production Chassis

in Stainless Steel are available once more

AND IN STOCK AT SCD. Alleluyha !

£17.00

Super 2 Piece 1/24 FX Production Chassis

Quintessentially Indefatigable

Now Toughened by Demand

This LIGHTWEIGHT Stiffened Chassis now has the

Makings of a Winner

(Stiffer, Fitter, Lighter and Quicker)

THE SUPER FX CHASSIS (2 models - for C can or S16D can) - Still £13.00

ISRA, BSCRA and BSL Legal

Get a Grip

click here

April 2008

The Artistry and Craftsmanship of Ernie Mossetti - Top Slot Stuff

1/24 Eurosport, 1/24 Open Gp 12 and 1/32 Eurosport

More pictures here

Mossetti 1/32 Eurosport

KIT and Ready Built by Ernie -

KITS are £75.00

Ready Built by Ernie are £115.00

Mossetti 1/24 Open Group 12 AND Eurosport

KITS as shown -

KITS are £75.00

Ready Built by Ernie are £115.00

Betta 1/24 1973 Porsche 917/30

.007" or .010" - £2.50

New BETTA 1/32 GT - 2008 Ascari GT3 - £2.20

Useful and nicely moulded as usual

March 2008

The Supreme VOKI Setups - Single Mag, 6 Mag and 8 Mag

Prices on application

Centre - For .250" stack .480" diameter Capped Comm PK armatures

Bottom - For .300" stack .480" diameter Capped Comm PK armatures

'1/32 Lovely Job'

Kit £21.95 Built Like This £27.00

Magnetic Balancer - £31.50

Static Balance your slot wheels and gears

3/32" dia Drill Blank shaft included (with precision ground points)

Abrasive Cleaning and Polishing Blocks - £5.00 each

Size :- 78x 48x 18mm

Extra Course (36 grit) - Course (60 grit) - Medium (120 grit) - Fine (240 grit)

For cleaning and polishing iron, steel. aluminium, plastics and paintwork etc.

Can be used dry or for a finer finish used with water, washing up liquid, white spirit or paraffin.

February 2008

Ground shafts for Hudy Tyre Truer

For the new 2mm diameter axle tyres

3mm ground down to 2mm diameter - £5.00

Complete with collar - £6.00

Ground shafts for Hudy Tyre Truer

For Ninco 2.5mm Axle Tyres

3mm ground to 2.5mm diameter - £5.00

Complete with collar - £6.00

ABs NEW Chassis Jig

For 1/32 and 1/24 scales. For 3/32" or 1/8" axle

Stainless steel and Carbon Fibre

£48.50

New JK 1/32 scale 3-piece Falcon Sp Chassis

1mm Stainless Steel Centre and 2 Separate Pans

£15.80

December 2007

1/24 Cheetah II 3-piece Chassis - £14.00

Stainless steel 3-piece .030" for C cans and later D cans

1/24 Magnetic Body Mounting Block - £16.00

180mm x 100mm x 6mm thick Plexi-Glass

with recesses for front and rear wheels, and braids,

and 4 Neo-magnets

VOKI SINGLE MAG SET-UPS

For PK .250" stack .480" diameter - £72.00

( Multi Mag Set-Ups due soon )

November 2007

CAHOZA 8 and 10 mag set-ups

For PK arms .300" long stack .480" or .485" diameter

8 magnet set-up - £85.00

10 magnet set-up - £99.00

NEW RELEASE

Slot Facts Machine Computer Dyno w/ Windows Program & USB Adapter

Why Dyno a Motor Anyway?

Judging a motors performance based on maximum RPM is like judging the weather based solely on the temperature. If it is 80 degrees outside you can be fairly sure it’s not snowing, but is it sunny or raining? Is it windy or calm? Temperature is only one factor in the weather, just as RPM is only one factor in the selection of a motor. Just like there’s wind and precipitation, there’s torque and power. Only a dyno test can tell you the complete story. Let’s suppose you and a competitor both have motors that will turn about 30,000 RPM. Without a dyno, most people would say that you have equal motors. But suppose his motor accelerates to 30,000 RPM in 2 seconds, while yours takes 2.5 seconds. Assuming both cars are geared to top out at 30 mph, this makes a 4-foot difference at the end of a 20 ft. straight and an 11 ft. difference at the end of a 90 ft. straight.

STILL THINK THE MOTORS ARE EQUAL?

The difference in the motors discussed above is in their TORQUE. The one that accelerates faster has more torque, and since POWER equals TORQUE multiplied by RPM, you can see that even though both motors turned 30,000 RPM at some point, your competitors motor had 25% more power than yours. Power is what you want in a motor; not no-load RPM! The only way to determine the power output of a motor is on the dyno where torque and RPM are measured at a consistent voltage to determine power. The “SLOT FACTS Machine” utilizes the only system on the market that can do these measurements on a consistent basis. Slave motors and load cells just can’t cut it.

OPERATIONAL THEORY

The dyno senses the speed of the flywheel, with a known moment of inertia, and also senses the current being delivered to the motor (this information is sent to your PC). The speed of the flywheel at specific intervals is integrated to obtain the acceleration of the flywheel. The torque output of the motor is computed from the flywheel moment of inertia and the flywheel acceleration. At the same time, the power output of the motor is being computed from the torque output and the flywheel speed. All of this information is then made available to the user in the form of graphs and charts. These options are selected by simply moving through the menu choices to provide output to the screen, your printer, or a file for later use.

'Approx £420 depending on current exchange rate'

Spare Aluminium Replacement Flywheel available -

only needed after dynoing a few thousand motors.

PROSLOT FX 1/24 Production Chassis - £13.00

Lightweight, material as per Champion Turboflex but a little thinner

Left - C can version. Note gear protection. SCD rear chassis brace shown in situ.

Right - D can version (slightly larger motor opening)

SCD Polo Shirt - £15.00

Sizes XXL, XL, L, Med, Small

Bright Purple with embroidered SCD logo on Left Breast,

embroidered Union Jack on Right Sleeve

and yellow screenprint across Back

October 2007

Anodised Aluminium Set-up Block - £19.50

Precision Machined Aluminium

Flat and 3 recessed areas .010", .020" and .030"

NEW Proslot BIG diameter S16D armature

PS-700B Balanced .560" diameter

The Best - £16.50

September 2007

New Body Shells from AAA and CAT click here

The Superb PARMA Flexi-5 4 Phenomenal Success in the USA

A precision manufactured 3-piece Production Chassis with interlocking pieces.

Precise pressing of components ensures super accurate fit of the 3 parts.

Stainless Steel ensures strength, longevity and retained clean finish.

Design ensures strength and top unbeatable performance

Check out the opposition.............

Flexi-5 is Stronger - does NOT need reinforcement of the guide tab

Flexi-5 is longer lasting

Flexi-5 is flatter

Therefore less hassle, easier to set up and superior in all aspects.

SUPER SPECIAL PRICE £14.00 including rear axle oilites.

Special prices for Falcon/Flexi-5 Kits AND multiple purchases

Fantastic Club Racer. You will know you're onto a winner.

August 2007

IN STOCK NOW

STUFF THE OPPOSITION WITH THIS STUFF

Great NEW MOSSETTI chassis

2007 EUROSPORT CHASSIS KITS

NEWLY ADVANCED DESIGNS

Left - 1/32 EDM CUT - 0.9mm

Right - 1/24 EDM CUT - 1.0mm

Beautifully cut and surface ground

Order now for immediate delivery..................

The new Falcon 7 will be available week commencing 5th August @ £7.25

SCD Aluminium Blocks - Various Colours - £15.00ea - 4"x8"

June 2007


Cahoza Gp 12 Motor - O (with Koford TriStar Arm .518") #230-O - 'O' can, Tornado 1 glued magnets, precision oilites - £26.50 #235-O - Cahoza Blueprinted w. 2 ballraces - £49.50	Cahoza Gp 12 Motor - U (with Koford TriStar Arm .518") #230-U - 'U' can, Tornado 1 glued magnets, precision oilites - £26.50 #235-U - Cahoza Blueprinted w. 2 ballraces - £49.50

Cahoza PROFI Gp 12 Motor - O (with Koford TriStar Arm .518") #238-UL TOP BLUEPRINTED Open Gp 12 MOTOR 'UL' lightened can, Tornado 2 glued Selected Matched Magnets, Aluminium Endbell (Vertical Brushes) - 2 ballraces - £77.50