Retro Wheels

SCD

15mm dia x 6mm and 15mm dia x 4.6mm

17.5mm dia x 6mm and 17.5mm dia x 4.6mm

4.90 pair

 

BETTA

9/16" dia x 3/16" and 11/16" dia x 3/16"

and 9/16" dia x 3/16" raised centre hubs

5.60 pair

 

3 litre F1/F5000/Indy Fronts, free rotating on 16g

1/2" dia x 7/32" - 4.25 pair

As above for rears

1/2" dia x 3/8" - 4.75 pair

 

SCD

1/12" dia x 3/16" and 9/16" dia x 3/16"

Both Sizes 3/32" or 1/8" bore

3.00 pair

1/2" dia x 11/32" and 1/2" dia x 13/32"

Special SCD STOX hubs - 3.50 pair

 

SCD Urethane Tyres 27/32" (21mm), SCD Urethane Tyres for Retro, '0's 1" dia and 3/4" dia  (on 1/2" hubs)

and SCD Urethane Tyres 27/32" (21mm) dia to fit -  all 4.00 pair

 

 

Also available

'U' Brackets, Guide Tabs, Cranked Axle, Drop Arm and Chassis Building Materials

MRRC 'U' Brackets  -  30p each

Left - For 222 motor

Right - For 111 motor

SCD Brass 'U' Bracket  -  5.95
3/4" x 3/4" x 1/16" Brass.  Accepts C or D can motors.
Very Popular Slotstox Bracket for Parma Home Set Motor, 16D Motors
and C Can Motors.   Comes complete with axle oilites and self tapping screws.

Brass 'U' Bracket machined from solid  -  8.50
3/4" wide fits a variety of motors.

SCD Brass Guide Tongue  - 90p
1/2" wide x 18SWG
SCD Brass Flat Motor Plate  -  90p
20SWG Made for C Can Motors
SCD Cranked Front Axle  -  70p
16G Piano Wire for 1/32 Scale Cars
 
 
SCD Brass 'U' Bracket  -  5.95
1" x 1" x 1/16" Brass    Accepts C or D can motors
Complete with axle oilites and self tapping screws

MRRC Brass 'U' Bracket  -  75p
7/8" wide brass for 3/32" axle

REHCO Brass 'U' Bracket  -  3.00
15/16" wide 21swg thickness for 1/4" o/d diameter tube or oilites

Brass 'U' Bracket
21mm wide 18SWG brass to take 3/32" bore brass tube and oilites
Bracket on its own  -  4.75
Bracket with tubes, oilites and self tappers  -  7.25

Drop Arm  -  3.00
16SWG brass (1/16") (1.6mm) x 3/4" (19mm) wide
2 19/32" (66mm) from hole centre to rear