Rear Axles

Mura, Parma, Slick-7 Drill Blank Axles 3/32"x 2 5/16" long -  £1.60

Parma Drill Blank Axle 1/8" diameter x 2 3/4" long  -  £2.00

Koford Drill Blank Axles High Spec 3/32"x 2" long   -  £2.20 

Slick-7 Hollow Axle (St.Steel) 3/32"  -  £3.00

Slick-7 Air Cored  Axle EDM Cored D.B.)  -  £3.00

Koford Hollow Drill Blank Axle 3/32"  -  £3.00

Parma Long Drill Blank Axle 3/32"x 2 7/8"  -  £2.00

Cahoza Hard High Spec Axle 3/32", VERY Precise  -  £3.00

 

Rear Axle Oilite Bearings

Parma and Mura Oilites 3/32"x 3/16"  -  £1.30 pair

Slick-7  3/32"x 3/16"  or 1/8"x 1/4" Machined Bronze  - £1.80 pair

SCD  3/32"x 3/16"   or 1/8"x 3/16" oilites  -  £1.50 pair

Parma 1/8"x 1/4" (Flat Faced for Nylon Trigger Pivot) -  £1.30 pair

Parma 3/32"x 1/4" Oilites  -  £1.30 pair

Parma 1/8"x 1/4" Oilites  -  £1.30 pair

Parma Square Oilites (Offset Hole) 3/32"x 1/4"  -  £1.30 pair

Parma Square Oilites (Offset Hole) 1/8"x 1/4"  -  £1.30 pair 

 

Axle Spacers

SCD Axle Washers, Brass 3/32"  -  50p

SCD Axle Washers, Steel 1/8"  -  50p

Parma Nylon Spacers 1/8"x 3/64" thick  -  75p

Betta Assorted Axle Spacers, Brass 1/8" or 3/32"  -  £1.45

Betta Axle Spacers, Brass 3/32"x .007" or .015"   -  £1.00

Slick-7 St.Steel Spacers 3/32"X .005" or .024"  -  £1.80

Slick-7 Polymer Spacers 3/32"x .015"  -  £1.80

Cahoza Polymer Spacers 3/32"x .015"  -  £2.00

Koford Polymer Spacers (Flanged) 3/32"x 3/16" long -  £1.20 pair

Ballrace Protector Washers  -  4pairs - £1.00

 

Rear Axle Ballraces

Ballrace 3/32"x 3/16" Class 5 Flanged and Shielded  -  £5.50 each

Ballrace 3/32"x 3/16" Class 5 Flanged, Open  -  £5.50 each

Ballrace 1/8"x 1/4" Class 5 Flanged and Shielded  - £5.50 each

Ballrace 3/32"x 3/16" (Ceramic Balls) Flanged and Shielded  -  £7.00 each

Rear Axle Ballraces  -  All £5.50 each

Abec 5 very good quality.      LEFT to RIGHT

1/8" x 1/4"  Flanged and Shielded

1/8" x 1/4"  Flanged Open

3/32" x 3/16"  Flanged and Shielded

3/32" x 3/16"  Flanged Open